Autel MaxiFlash J2534 VCMI
£1,400.00
The MaxiFlash VCMI is a vehicle communications and measurement interface. The VCMI is a Bluetooth/Wi-Fi-enabled communication interface that supports CAN FD, 4 CAN Channels, DoIP, D-PDU, IS O22900-1 & ISO 22900-2 protocols and is RP1210 compliant. The VCMI also functions as a 4-channel oscilloscope, multimeter, CAN bus tester and wave generator. The VCMI can be used with the MaxiSYS MSUltra and the MaxiSYS MS919 tablets and standalone for module programming on compatible Mercedes and BMW vehicles and with a Windows computer for OE programming.
Direct ship
Autel MaxiFlash J2534 VCMI (5-in-1 Interface)
Vehicle Communication, Measurement, and OEM Programming Gateway.
The Future of Vehicle Communication. The Autel MaxiFlash VCMI (Vehicle Communication Measurement Interface) is the next-generation integrated VCI, combining advanced vehicle communication and multi-channel measurement functions into one robust unit.
This single device acts as a high-speed J2534 Pass-Thru, a complex VCI for all vehicle protocols (DoIP, CAN FD), and an integrated 4-channel oscilloscope and multimeter. It is the essential hardware upgrade for workshops that need reliable OE programming and deep-level electrical diagnostics.
5-in-1 Integration
- ✓ VCI: Multi-channel vehicle communication.
- ✓ J2534 Pass-Thru: OEM Flashing/Programming.
- ✓ Oscilloscope: 4-Channel integrated scope.
- ✓ Multimeter: Built-in measurement functions.
Advanced VCMI Capabilities
Integrated Oscilloscope
Features a 4-channel scope with guided tests, large memory, and preset libraries. Essential for visualizing complex electrical signals like CAN bus packets, ignition, and sensor outputs.
J2534 & OEM Programming
The VCMI is fully compliant with J2534, D-PDU, and RP1210 protocols. This allows it to function as a Pass-Thru device for OEM factory software, enabling module flashing and ECU reprogramming.
New Protocol Support
Built-in support for DoIP (Diagnostic over Internet Protocol) and CAN FD (Flexible Data-Rate) protocols ensures compatibility with the newest vehicle architectures (e.g., BMW G-Series, Jaguar/Land Rover, modern GM).
Stable Multi-Communication
Offers multiple connectivity options (USB, Wi-Fi, Bluetooth, Ethernet), providing stable and redundant communication paths critical during ECU programming and remote diagnostics.
Technical Specifications
| Product Type | MaxiFlash VCMI (Vehicle Communication & Measurement Interface) |
| Measurement Channels | 4-Channel Oscilloscope, Multimeter, Waveform Generator, CAN Check |
| Protocols Supported | J2534, D-PDU, RP1210, DoIP, CAN FD, ISO, SAE |
| Connectivity | Wi-Fi, Bluetooth, USB, Ethernet |
| Power | Rechargeable Internal Battery |
| Compatibility | MaxiSys Ultra, MS919, MS909, and other compatible Autel Tablets |
Package Includes: MaxiFlash VCMI Unit, .
Note: This is the hardware interface only. Diagnostic and programming software is licensed via the paired MaxiSys tablet (sold separately or included in larger kits).
Autel MaxiFlash J2534 VCMI Knowledgebase
What makes this VCMI different from a standard J2534 interface?
It is a 5-in-1 device. Unlike a standard VCI, this unit integrates five powerful tools into one: a Vehicle Communication Interface (VCI), 4-Channel Oscilloscope, Waveform Generator, Multimeter, and CAN Bus Tester.
Can I use this with a Windows laptop for OEM programming?
Yes, it is a fully compliant J2534 Pass-Thru device. You can connect it to a PC via USB or Wi-Fi to run OEM software like Ford FJDS, GM GDS2, Toyota Techstream, and BMW ISTA for dealer-level programming.
Does it support DoIP and CAN FD protocols?
Yes, natively. The VCMI supports the latest protocols including DoIP (Diagnostic over IP) and CAN FD (Flexible Data-rate), which are essential for communicating with 2020+ vehicles from brands like GM, Land Rover, and Volvo.
What is the bandwidth of the built-in oscilloscope?
It features a 20MHz bandwidth. With a sampling rate of up to 80MS/s, the 4-channel oscilloscope is powerful enough to capture high-speed signals like FlexRay and CAN bus data without missing glitches.
Is this the correct replacement interface for my MaxiSys Ultra?
Yes, this is the original equipment VCMI for the Ultra series. If you have lost or damaged the interface for your Autel MaxiSys Ultra or MS919, this is the exact genuine replacement unit.
Does it work with the Autel MS909?
It can, but with caveats. While it functions as a VCI for the MS909, the MS909 tablet software does not typically include the advanced Oscilloscope and Signal Generator apps found on the Ultra. This unit is best used as a PC interface or Ultra/919 replacement.
Does the Waveform Generator simulate sensors?
Yes, it can simulate complex signals. You can output signals to simulate DC voltage, square waves, or even specific crank/cam sensor patterns, allowing you to test ECU response without replacing parts—a technique frequently used by Mobile Eco Tuning technicians.
How far is the wireless range?
It operates up to 70 meters (230ft). The VCMI uses advanced Wi-Fi connectivity to maintain a stable connection with your tablet or PC, allowing you to walk around the vehicle or sit at a desk while diagnosing.
Does it have a built-in Multimeter?
Yes, a professional-grade multimeter is integrated. It measures voltage, current, and resistance directly through the interface, saving you from having to carry a separate meter to the vehicle bay.
Why should I buy this VCMI from Mobile Eco Tuning (MET)?
We guarantee genuine UK stock. Many online listings are "grey market" units that may be locked or incompatible with UK software. We supply official Autel UK units, backed by the technical expertise of our company Mobile Eco Tuning.
Does it support D-PDU and RP1210 protocols?
Yes, it is fully compliant. Support for D-PDU (Diagnostic Protocol Data Unit) and RP1210 makes it compatible with heavy-duty and commercial vehicle diagnostic software when used with a PC.
Does the CAN Bus Check function require a separate tool?
No, it is built-in. The VCMI can check the status of the CAN lines (Voltage, communication integrity) directly via the OBDII port, giving you a quick "Pass/Fail" on network health before you even start deep diagnostics.
Is the device rugged enough for daily workshop use?
Yes, it is designed for the workshop. It features a rubberized housing for shock protection and secure connectors. However, as it contains sensitive oscilloscope electronics, we recommend storing it in a case when not in use.
Can I use this to code BMW and Mercedes online?
Yes, when paired with a valid subscription. Whether using it with the MaxiSys Ultra tablet or a PC with OEM software, this interface handles the complex data transfer required for online SCN coding and module programming.
Does it need an external power supply?
It can be powered via OBD or DC. For standard VCI functions, it draws power from the vehicle's OBD port. For heavy oscilloscope use or when flashing on a bench, it has a DC input for stable external power.
Can I pickup a Autel Maxiflash J2534 Vcmi near me?
Yes. If Autel Maxiflash J2534 Vcmi is showing in stock, it is available for collection from our Weston Super Mare store on the same day before 5pm. Next day UK delivery is also available as well as global delivery. Visit https://shop.mobileecotuning.com/shipping for more details
For further technical enquiries, please visit Mobile Eco Tuning.
| Weight | 1 kg |
|---|---|
| Brand |
Related products
AUTEL 909 919 ULTRA SERIES
Out of Stock
High stock
