Autel MaxiVCI V200 Bluetooth
Wireless. Lightweight. OE Ready.
Cut the cable and road test with full tablet control
The Autel MaxiVCI V200 is a wireless Bluetooth vehicle communication interface that pairs with the MaxiSys MS906 PRO, ITS600 and MaxiIM KM100. It lets a technician diagnose and road test away from the bench, streaming CAN, OBDII and EOBD data straight to the host tablet without a tethered lead.
CAN, OBDII, EOBD
MS906 PRO, ITS600, KM100
1 Year Warranty
What the MaxiVCI V200 actually does
The MaxiVCI V200 is the communication bridge between an Autel tablet and the vehicle. It plugs into the OBDII port, establishes a Bluetooth link to the tablet, and passes the diagnostic traffic between the two so the tablet can read modules, run tests and log live data. In plain workshop terms, it is the piece that turns a MaxiSys MS906 PRO, an ITS600 or a MaxiIM KM100 into a working vehicle interface. The tablet holds the software and the coverage. The V200 does the talking to the car.
Because the link is wireless, the V200 removes the umbilical cable that ties a technician to the driver footwell. That single change is more significant than it first appears. It means you can sit the tablet on the passenger seat, or hand it to a colleague, while the vehicle is running, being cranked, or out on the road. For any fault that only shows itself under load, that freedom is the difference between guessing and seeing.
Why a wireless VCI earns its keep on a road test
The most valuable diagnostic data rarely appears with the car sitting still in the bay. Intermittent misfires, fuelling faults that only bite under boost, gearbox adaptation issues and lambda behaviour under real throttle all need the vehicle moving. With the V200 paired and the tablet in the cabin, you can channel the live parameters that matter, watch fuel trims settle or drift, track requested against actual boost, and catch a fault code the instant it sets rather than reconstructing it afterwards. That is the professional case for a wireless interface. It moves diagnosis from static snapshots to live behaviour under genuine conditions.
It also keeps a technician safe and legal. A second person can hold the tablet and read the data while the driver concentrates on the road, so nobody is trying to interpret a graph and steer at the same time. In a busy workshop that division of labour turns a long, awkward job into a clean, repeatable one.
Confirmed tablet pairing
This listing scopes compatibility to the tools Autel confirms for the V200: the MaxiSys MS906 PRO, the ITS600 and the MaxiIM KM100. Pair it with one of those and it behaves as the intended OE level interface for that platform. It is worth being precise here rather than assuming the V200 slots into every Autel tablet in the range, because VCI compatibility is tied to specific hardware and firmware pairings. If you run a mixed fleet of Autel tools across your bays, match the VCI to the platform it is listed for and keep the pairings documented so a borrowed interface does not send a technician chasing a communication fault that is really a mismatch.
Streams diagnostic data to the tablet without a tethered lead, freeing the technician to work around the vehicle or road test it.
Confirmed as the interface for the MaxiSys MS906 PRO, ITS600 and MaxiIM KM100, giving those platforms their vehicle connection.
Live channelling under real load lets you catch faults that never appear with the car static in the bay.
Handles CAN, OBD, OBDII and EOBD traffic, covering the everyday communication standards a modern workshop meets daily.
A compact, light interface that connects at the vehicle OBDII port and stays out of the way while you work.
Brand new original Autel hardware backed by a one year warranty, so it is ready to earn from day one.
Technical specifications
| Specification | Detail |
|---|---|
| Brand | Autel |
| Device type | Vehicle Communication Interface (VCI) |
| Connectivity | Bluetooth |
| OBD interface | CAN, EOBD, OBD, OBDII |
| Systems accessible via host tablet | ABS, EPB, SAS, SRS, TPMS |
| Confirmed tablet compatibility | MaxiSys MS906 PRO, ITS600, MaxiIM KM100 |
| Warranty | 1 Year |
| In the box | 1 x Autel MaxiVCI V200 (tablet not included) |
Spread the Cost with Finance
Invest in professional equipment without the upfront outlay. Apply online for a no obligation finance quotation and get a fast decision, so you can put this tool to work in your workshop straight away.
When a paired tablet suddenly reports no communication with a vehicle it read fine last week, check the VCI firmware before you touch a single wire. After a tablet software update, an out of date VCI firmware version is one of the most common causes of a phantom comms failure, and it is routinely misread as a gateway fault or a broken CAN line. Re-sync the V200 firmware to the tablet first. Nine times out of ten the car was never the problem, and you have saved yourself an hour of chasing a wiring ghost.
