METClean DPF Lite bench machine

METClean DPF Lite Bench Machine (Unmanned Digital DPF Cleaning System)

A True Unmanned Machine While the Rest Stay Manned

The single biggest difference between the DPF Lite and almost every other bench machine sold in the UK is simple. Ours is genuinely unmanned. Most competing bench units still rely on an operator to stand at the machine and manage water injection by hand for the full cycle, which quietly ties up a technician on a job that should be earning elsewhere. The DPF Lite automates water injection from its 30 litre tank, so once you have mounted the filter and selected the program, the machine runs the entire cycle on its own. That is the true meaning of unmanned, and it changes the real cost of a clean. A manned machine spends labour on top of chemical and electricity every single time, whereas an unmanned cycle lets the same technician mount a filter, walk away, and pick up billable work while the machine does the graft.

Full Digital Control of Air, Water and Chemical Injection

This latest version introduces a full digital display for settings, putting the entire cycle under precise, repeatable control rather than guesswork. Two gauges give you a live reading of main tank air pressure and water pressure, so you can see exactly what the filter is receiving at any moment. A twin regulator lets you trim air and water independently to suit a lightly sooted car filter or a heavily blocked commercial unit. You then choose automatic mode for a complete hands free program, manual mode for full operator control, or the dedicated manual water mode for flushing and stubborn blockages. At the heart of the process is direct chemical injection. One litre of the MET blend goes into the 30 litre tank and is driven straight into the DPF, breaking down the oil bound soot and compacted ash that air and water alone will always leave behind. Being able to watch both pressures live is a genuine workshop advantage, because a reading that will not build tells you about a collapsed substrate or a poor seal before you have wasted a full cycle.

Zero Motors, Zero Moving Parts, Built From Stainless

Reliability on a daily use machine comes down to what can wear out, and the DPF Lite is deliberately built with nothing to wear. It runs on your existing workshop compressed air and clean mains electronics, so there is no internal pump or motor to burn out, seize or leak. That matters, because a failed pump or motor is the most common and most expensive fault on the cheaper machines on the market, and removing them removes the main service liability entirely. The unit is also the only bench machine in the UK built from stainless steel, which is the correct material for equipment that handles corrosive ash and water every day and would slowly eat a painted mild steel frame. It stays light and easy to move around the workshop compared with full cabinet systems, and a hinged extension opens up to take longer filters that a fixed frame simply cannot accept.

Under £9 a Clean and the Lowest Price in the UK

The running maths is where this machine earns its place on the floor. One litre of MET chemical, a tank of water and the electricity for the cycle brings the cost of a full clean to under £9. Add in unmanned operation removing the hidden labour cost of standing over the machine, and your true cost per job drops to a level manned systems cannot match. On price, the first 20 units are offered at a promotional £4,700 plus VAT, moving to £5,300 plus VAT afterwards, which still makes this the most affordable stainless bench machine available in the UK today. Every unit ships with true METClean backup from the UK manufacturer rather than the silence you get from an unsupported import, and the design is tested daily at our UK HQ workshop and across our network of over 800 agents.