Yanhua ACDP-2 IMMO Locksmith Package 2025
The Yanhua ACDP-2 IMMO Locksmith Package 2025 is an advanced, solder-free key programming and immobiliser bypass system engineered for European luxury vehicles including BMW, Jaguar, Land Rover, Porsche, Volvo, Audi, and Volkswagen. Utilising patented pin-pointing interface boards alongside dual Wi-Fi and USB connectivity, it enables rapid immobiliser data extraction, ECU ISN reading, and key learning without component soldering or circuit board damage.
Elite Solder-Free Key Programming & Immobiliser Architecture
The Yanhua ACDP-2 platform fundamentally transforms modern automotive locksmithing by eliminating traditional soldering, wire lifting, and track cutting. Built around precision-engineered interface boards with intelligent pin-detection technology, the ACDP-2 host clamps directly onto vehicle immobiliser modules—such as BMW CAS/FEM/BDC, Porsche BCM, VAG MQB, and Volvo CEM—to read and write EEPROM and FLASH data safely. This completely removes the operational risk of thermal stress or micro-component destruction on delicate automotive circuit boards.
Upgraded for 2025, the second-generation ACDP-2 hardware features dual USB and Wi-Fi data connectivity, providing ultra-stable communication across PC, Android, and iOS platforms. Equipped with high-speed DoIP protocol acceleration for BMW F/G-Chassis BDC modules and advanced RH850/MQB 5A instrument cluster reading capabilities, the system provides unmatched bench and OBD programming throughput for professional locksmiths, automotive technicians, and mobile tuning specialists.
Key Capabilities & Comprehensive Multi-Brand Coverage
BMW CAS, FEM, BDC & BDC2/3
Full key learning, ISN extraction, and module reset across CAS1–CAS4+, FEM/BDC, BDC2, and BDC3 systems. Features high-speed DoIP preprocessing via OBD to program spare keys or recover All-Keys-Lost (AKL) scenarios without chip removal.
VAG MQB, MQB 5A/5C & RH850
Advanced immobiliser and mileage correction for Volkswagen, Audi, Seat, and Skoda platforms. Full support for 4th Gen, MQB48, and complex Renesas MCU clusters (R7F71401, R7F71402, R7F71407 RH850) on bench.
JLR KVM & 2018+ RFA Systems
Complete key programming for Jaguar and Land Rover vehicles. Supports 2011–2018 KVM modules without soldering, plus 2018+ DoIP models via RFA module replacement and OBD programming.
Volvo CEM & Porsche BCM
Covers legacy and modern Volvo platform CEMs (up to 2024) and Porsche Continental/Ceramic BCM modules (2010–2018+). Enables safe ICP chip reading and OBD key addition with zero track modifications.
Engineered for Workshop Performance & Agent Network Reliability
At Mobile Eco Tuning, we test and rely on the Yanhua ACDP-2 daily within our main UK HQ workshop, while deploying it across our network of over 800 mobile remapping and locksmith agents. Our close technical collaboration with Yanhua ensures our customers receive genuine, fully licensed hardware pre-configured for rigorous field operation.
By standardising on the ACDP-2 platform, workshops drastically reduce key coding labor time and completely eliminate component replacement costs associated with manual soldering mistakes. From bench cloning DME/ECU ISNs (N20, N55, B38, B48, MSV80, MSD85) to unlocking secondhand BMW smart keys for re-use, this package delivers maximum return on investment for automotive professionals.
Technical Specifications & Package Contents
| Component / Module | Supported Systems & Functions | Connection Mode |
|---|---|---|
| ACDP-2 Master Host | Core Programmer, Dual USB + Wi-Fi, 93/24/25/35/95 Series EEPROM | USB / Wi-Fi (iOS/Android/PC) |
| Module 1 (CAS Module) | BMW CAS1, CAS2, CAS3/3+, CAS4/4+ IMMO Key Prog & Mileage Reset | OBD / ICP Solderless Board |
| Module 2 (FEM/BDC) | BMW FEM/BDC Key Programming, IMMO Backup, Mileage Reset | ICP Solderless Clip Board |
| Module 3, 27 & Bench Boards | BMW ISN Read/Write: N20, N55, B38, B48, MSV80, MSD85, MSD8X, MSV90 | Bench Interface / OBD |
| Module 7 (Key Refresh) | Refreshes and unlocks used BMW E & F Chassis Keys for re-registration | Interface Board |
| Module 9 & 24 (JLR IMMO) | Jaguar / Land Rover 2011–2018 KVM & 2018+ RFA Smart Key Programming | ICP Board / OBD |
| Module 10 (Porsche) | Porsche BCM Key Programming (2010–2018) Add Key & AKL | ICP Solderless Interface Board |
| Module 12, 20 & 2023 CEM Kit | Volvo Semi-Smart & Full Keyless IMMO (2009–2024 CEM), XC40/60/90, S60/90 | ICP Board + OBD Key Learning |
| Module 29 (Audi Gen5 BCM2) | Audi A4/A5/Q5 (2013–2018), A6/A7/A8 (2013–2019) BCM2 Key Learning | Bench ICP / OBD |
| Module 31, 38 & BDC Platforms | BMW F Chassis BDC OBD DoIP, BDC2 Add Key / AKL, BDC2 Bench Platform | OBD CAN/DoIP & Bench Platform |
| Module 33 & 34 (VAG MQB / 5A) | VW/Audi MQB-33, MQB 5A/5C, RH850 Cluster (R7F71401/402/407) IMMO & Mileage | Bench Probe Interface |
💡 Mobile Eco Tuning Pro Tip:
When performing solderless ICP operations on sensitive immobiliser modules like BMW FEM/BDC or Volvo CEMs, always inspect the probe contact points using the integrated ACDP-2 pin detection test prior to reading data. Ensure the circuit board is thoroughly cleaned with electrical contact cleaner to remove protective lacquer or oxidation. This guarantees 100% data read integrity and prevents corruption of critical EEPROM files during decoding.
